M-Spec Performance presents new Audi TTS2.0 ECU Upgrade in Queens and Brooklyn! - M-Spec Performance

APR Presents the New Audi TTS 2.0 TFSI ECU Upgrade!

Posted on in Performance

APR Presents the New Audi TTS 2.0 TFSI ECU Upgrade!APR is pleased to present the ultimate engine control unit (ECU) upgrade for the 2.0T EA888 Gen 3 engine! APR’s ECU Upgrades are the best dollar-per-horsepower modification one can make to the 2.0T engine. The upgrades dramatically increase horsepower and torque, making for an exceptionally quicker and more exciting vehicle. This is made possibly through APR’s optimization of the factory engine management system to take full advantage of the engine’s capabilities, without needing any end user adjustment. The software loads to the factory ECU through the OBD-II port, resulting in a clean and headache-free install. APR ECU Upgrade Stages APR’s ECU Upgrades are available in multiple stages and torque levels, supporting various octanes both with or without any hardware or transmission modifications. Specific software is available for use with a high flow downpipe exhaust system, while all stages are fully compatible with an upgraded intake, intercooler, catback exhaust, or other minor bolt on modifications. Finally, each stage is offered with special “Low Torque” software, designed to limit peak torque for use with an unmodified factory manual clutch, or DSG transmission. APR Stage I ECU Upgrade The APR Stage I ECU Upgrade is the first step towards making more power! This simple upgrade requires no engine hardware modifications, and produces 357-381 HP with 349-392 FT-LBS of torque. Gains as high as 66-93 HP and 68-109 FT-LBS of torque are available throughout the power band, making the vehicle exceptionally quicker in all scenarios.  The upgrade is offered in both high and low torque versions, and is available for various fuel grades. The high torque upgrade may require an upgraded clutch, or APR’s TCU Upgrade to avoid clutch slip, so low torque software is available, offering an impressive 349-366 FT-LBS of torque. To get more power, the vehicle can be outfitted with an upgraded intake, intercooler, catback exhaust and other small modifications without requiring any new modification to the ECU. To run an upgraded high flow downpipe exhaust system, APR’s Stage II ECU Upgrade is required. For best results, APR recommends Denso IKH24 spark plugs with a .024″ +/- .002″ gap.  APR Stage II ECU Upgrade The APR Stage II ECU Upgrade is the next step towards making more power! This upgrade requires a high flow downpipe exhaust system, and produces 372-387 HP with 367-409 FT-LBS of torque. Gains as high as 86-104 HP and 82-125 FT-LBS of torque are available throughout the power band.  The upgrade is offered in high, medium and low torque versions, and is available for various fuel grades. The high torque upgrade requires, and the medium torque upgrade may require an upgraded clutch or APR’s TCU Upgrade to avoid clutch slip, so low torque software is available, offering an impressive 367 FT-LBs of torque.  An upgraded intake is required to meet the advertised low and medium output power figures, and an upgraded intercooler is required to meet the high output power figures. No ECU modification is necessary to run an upgraded catback exhaust system, or other small engine modifications. For best results, APR recommends Denso IKH24 spark plugs with a .024″ +/- .002″ gap.  Availability: 

  • Software is available on DPP now. Please do not announce this information until it’s officially announced on the APR website. We anticipate this information will go live on Wednesday, April 27th.  

Vehicle Guide: 

  • Audi TTS (8S / MK3) 2.0 TFSI EA888 Gen 3 S Tronic Quattro

Available Octanes, Stages, and Options:

  • Stage 1 (Low & High Torque) – 91 AKI
  • Stage 1 (Low & High Torque) – 93 AKI
  • Stage 1 (Low & HIgh Torque) – 100 AKI
  • Stage 2 (Low, Medium & High Torque) – 91 AKI
  • Stage 2 (Low, Medium & High Torque) – 93 AKI
  • Stage 3 (Low, Medium & High Torque) – 100 AKI
  • Single program only

Requirements:

  • Stage 1 requires the factory downpipe.
  • Stage 1 high output may require the APR TCU Upgrade.
  • Stage 2 requires a high flow downpipe.
  • Stage 2 medium output may require the APR TCU Upgrade.
  • Stage 2 high requires the APR TCU Upgrade.
  • Stage 2 high output may require an intercooler to meet the advertised figures.
  • Compatible with normal bolt-on modifications.
  • Denzo IKH24 Spark Plugs with a .024″ +/- .002″ gap are recommended.

Power Figures:

  • Detailed power figures are available on the website. Output is the same as the US Golf R and S3.

Flashing / Extract Method:

  • OBDII Port Flash via the Cheetah Cable.
  • ECU must be sent in for extracts.

Available Box Codes: The following box codes / revisions are available now. If a new box code is discovered, please put in a request for the code. Additionally, if the ECU is needed in house, please reach out to your account rep to have the ECU sent in, and a promo code issued for your customer.

  • 8S0906259C S0001

Price Class:

  • 2.0T-MQB-IS38-SP

Other TTS Products:

  • APR DQ250 TCU Upgrade – Available now
  • APR Carbon Fiber Intake System (Front Pipe) – TT adapter coming soon
  • APR Carbon Fiber Intake System (Rear Pipe) – Available now
  • APR Carbon Fiber Intake System (Coolant Pipe) – Available now
  • APR Intercooler – Need confirmation
  • APR Turbo Muffler Delete – Available now
  • APR Boost Hoses (All Hoses) – Available now
  • APR Boost Tap – Available now
  • APR Catch Can – Available now, but requires the intake, which requires an upcoming adapter
  • APR Stage 3 / 3+ – Needs confirmation

Thank you and Go APR!

Avatar photo

Written by M-Spec Performance